Damping hinge can be fixed at different angles. It is composed of shell, mandrel, spring and plug. During installation, it is fixed by plastic wrapping. The shell is wrapped in one product, and both ends of the rotating shaft are wrapped in another product, so as to realize the relative rotation of the two products.

In the process of solid lubrication, solid lubricating materials and surrounding media should react physically and chemically with the friction surface to form a solid lubricating film to reduce friction and wear. Solid lubricating materials are divided into organic polymer materials and inorganic materials.

Metal powder injection molding technology is a new type of powder metallurgy near-net forming technology, which is formed by introducing modern plastic injection molding technology into the field of powder metallurgy. With the development of modern industry, metal powder injection molding technology has developed rapidly, and our Mingyang Technology also provides excellent metal powder injection molding parts.

The oil supply system is a labor-consuming and time-consuming setting in engineering design. When using solid lubricated bearings, it is unnecessary to consider the oiling device, which saves the oiling device and equipment. At the same time, the solid self-lubricated bearings can be designed into various shapes for various special occasions to meet the needs of various occasions. By using solid self-lubricated bearings, the costs of mechanical maintenance and oil can be greatly reduced.

Oil-free bearings are now widely used in metallurgical continuous casting machines, steel rolling equipment, mining machinery, ships, steam turbines, water turbines, injection molding machines and equipment production lines. Today, Mingyang Technology will talk about matters needing attention in the installation of oil-free bearings.

Mingyang Technology has worked hard in the tool industry for more than 10 years and accumulated rich development experience. In 16 years, it cooperated with a domestic electric tool company and successfully developed a variety of products for it. Through product optimization, die design optimization, product material design and heat treatment process optimization, Mingyang Technology makes the product performance meet the torsional strength greater than 50Nm and reach the level of cold heading steel; In terms of accuracy, the run-out yield at the end face 30mm is over 97%.